How can I create a platform on my stairs strong enough to …
A scaffold for a staircase would be nice, but there's no place around here that rents them out for a reasonable price. I came across an idea on YouTube to set a ladder up against a wall and then lay a board across the staircase and one of the rungs on the ladder, but there's no way I can transport a board of such length in my sedan.
painting - How do I safely paint the walls and ceiling in this high ...
1) Lean a ladder against the lower wall, put boards connecting it with an upper stair, and put a ladder on top of that. 2) Use a baker scaffold. Baker scaffolds can be set up with varying height legs. Then put a ladder on the baker scaffold. This is my recommended solution. 3) Use a 2 wheel edging paint pad that will allow you to cut-in using a ...
How can I safely replace a light fixture above a stairwell?
Feb 7, 2020 · How can I get a stable ladder or platform in place to safely work on that fixture? The second story ceiling is 8 feet 6 inches above the floor, as shown in this photo: On the other side of the railing, the distance from the fixture to the closest step on the first flight is about 15 feet: This is what I intend to replace the fixture with:
Suitable ladder for reaching stair well above corner stairs
Jan 27, 2022 · @TonE an internet search for "multi-position ladder" netted a variety of results. Big-blue and Big-orange seem to both carry a single Werner ladder with 3 hinges so it will fold into a flat work platform. The online giant carries a wide variety of no-name versions in a multitude of lengths and of unknown quality.
How can I set up a removable stair railing? - Home Improvement …
Jul 7, 2012 · 8. I need to install a handrail on a set of interior stairs. I also need to be able to remove the handrail and balusters so that furniture can be taken up those stairs because of limited clearance. how can i attach the handrail and balusters to the upper and lower newel posts so that they are removable? It looks similar to this except the knee ...
Cutting ceiling joist for attic ladder install
Doubled headers spanning up to 6ft can be end-nailed. Beyond 6ft, use hangers. Tail/cripple joists over 12ft should have hangers. If double trimmers must be used, they need only extend from the outside edge of the nearest load-bearing wall to the outside edge of the other nearest (in the opposite direction) load-bearing wall.
How can I build a custom stair case in a small space?
We really, REALLY, want to use the attic space as storage / den / office space. We've finally come to the conclusion to use the spare room's closet as the space for a staircase to the attic. its an insignificant space (. I just took a rough measurement of the closet - total run: 4 feet 4 inches (inside stud to inside stud) and a total rise: 7 ...
Install New Attic Access Ladder Perpendicular to Joists
May 24, 2021 · Install the attic ladder/stairs in a way that it is parallel to the joists. These units are often made so that they just fit between joists that are 24" on center. If your joists are such then this is great. If not they you have cut out one joist and frame in headers at each end of the opening to support the cut off joist at each end.
Do stairs need to be the same height after landing?
Jan 20, 2014 · According to the International Residential Code (IRC), the 3/8" variance only applies to a "flight of stairs" not the entire "stairway". International Residential Code 2009 Chapter 3 - Building Planning Section 311 Means of Egress. R311.7 Stairways. R311.7.4.1 Riser height. The maximum riser height shall be 73/4 inches (196 mm).
wood - Installation of permanent stairway into the loft - Home ...
Dec 4, 2021 · The new stairway has to be over the existing stairway because of restricted space. The only load bearing wall is a gable wall. What I want to do is attach the new stairways quarter landing to the gable wall in order to avoid having to have support legs. The new stairway would be made from redwood pine and the landing would be approx 650 mm ...